T 3653 550

7 4 5 6 3 2 14 Valid for contact arrangement: 03a, 04a, 05a, 06a, 07a T 3638 550 U T 3638 559 U T 3507 550 U T 3507 559 U 7 T 3487 550 U (07-b) T 3487 559 U (12-a) +0,1 18 0 max 3,5 8 19,1 0 +0,1 M18x0,75 20 E 7 2,8 1,5 (07-a) +0,1 6 (06-a) 13,0 5 (05-b) D 1) Rated voltage2) Rated voltage Rated impulse withstand voltage2) Pollution degree2) Installation category Insulation group C Current rating Insulation resistance Contact resistance Climatic category Temperatur range IP degree Insertion and withdrawal force IEC 60664-1 UL 1977 IEC 60664-1 60664-1 60664-1 IEC 60664-1 IEC 60512-5-2 UL 1977 IEC 60512-3-1 IEC 60512-2-1 IEC 60668-1 IEC 60668-1 IEC 60529 IEC 3 03-a 4 04-a 5 5S IEC IEC 60512-13-2 60512-9-1 Housing material Dielectric material Contacts 7 7 8 12 14 07-b 08-a 12-a 14-a 100 V 150 (32 V) 10A/+40°C V (32 V) 60 V (500 V) 10 >10 Ohm DIN IEC 60130-9 EN 61076-2-106 3A/+40°C/+104°F 3) 500 mating cycles gold >1000 mating cycles brass or zinc die cast nickel plated or thermoplast thermoplastic silver or gold plated, please order contacts separately acc. to drawing M-N 02 015 00XX X (3-8pol) or M-N 02 010 0157 X U (12-14pol) dimension of nut 23 Gewicht (errechnet) / Calc WT : 0,09-0,25mm² / 28-24 AWG Prüfmaß / Testdimension Teileindex / Partindexnumber: 6 5 ISO 2768-c Maßstab / Scale : 2:1;1:1 CUSTOMER DRAWING DIN / ISO 13715 28.04.2020 Drawn MCARLE Status Released Gepr. 30.04.2020 Checked MGRIMM A3 Gez. metal screw coupling; tightening torque 1,0Nm Edition 2000-05 A values in brackets are according to DIN EN 61076-2-106 3) under operating conditions >108 Ohm All technical data have been measured in a laboratory environment and can be different during pratical usage of the product. Any product informtion is for descriptive usage only and not legally binding; particulary the information does not constitute or provide any legal guaranties. Do not connect or disconnect under load. Metal housing parts shall be securely incoporated to protected ground. Parts according to directive 2002/95/EG (RoHS). Zul. Abw./Tolerances : Bagatelle change: 2) 7 D T 3303 559 U Contact Number arrangement of View on contacts mating side 1) 8 T 3359 559 U 4 T 3303 550 U (04-a) (03-a) crimp Flamability T 3359 550 U T 3363 559 U 3 400 < CTI < 600 7A/+40°C/+104°F T 3403 559 U T 3363 550 U (05-a) 1200 V 2-6 pol (exclusive 5S): 0,09-1,0mm² / 28-18 AWG 5S, 7, 7S, 8pol: 0,09-0,75mm² / 28-20 AWG UL 94 VO Wire gauge 5 - I II, Termination technique locking system 6 05-a 05-b 06-a 07-a 300 V 300 V 100 V 300 V (100 V) (63 V) (32 V) (63 V) 250 V 1500 V 1200 V 1500 V (840 V) (500 V) (840 V) 1 (2 ) IEC Mechanical operation B Standard EN 61076-2-106 IEC 60130-9 T 3403 550 U 20 DIN T 3478 559 U 0 1,5 shown with ring nut Number of contacts Contact arrangement Contact arrangement T 3478 550 U FAI2020-001467 M18x0,75 (08-a) 13,0 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmuster-Eintragung vorbehalten. F 12 1 E T 3653 559 U Panel cutout M 1:1 11,5 1 T 3653 550 U 202000001 Index Änderung/Description 01 30.04.2020 MCARL Datum/Date Name Gerätedose female receptacle Amphenol Tuchel Industrial GmbH M Blatt/Sheet NA T 3XXX 55X U Ers. f. / Replacement for : M-NA T 3XXX 550 Rev02 1 1 Bl. NXM-V01 Valid for contact arrangement: 05b, 07b, 08a, 12a, 14a F 20 Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of the utility model or design. (14-a) 1 SW20 8